Get Your Free
Roof Inspection

Thank you! We'll reply ASAP!

Tile Roof Underlayments

Tile Roof Underlayments

Roof Tile Underlayment, is it important?

Traditional Felt Underlayment VS New Synthetic Underlayment

What exactly is my tile roof’s underlayment: This is the water proofing barrier between your tiles and your wood deck, first line of defense. There are two types of underlayment systems; Traditional SBS Modified 40# underlayment system and the synthetic (polyethylene or polypropylene) underlayment system.

For FAST service, call TRM Roofing 480-629-9484

FREE Roof Inspections for Phoenix, Mesa, Scottsdale, and Surrounding Areas

Traditional 40# Underlayment:

 In the Phoenix metro market there are 3 top manufactures of traditional SBS Modified underlayment: Fontana Vulcaseal® G40, Layfast® SBS TU43, and Boral®’s Ply 40. These underlayments are SBS (Styrene-Butadiene-Styrene) Modified Bitumen with infused fiberglass making them extremely long-lasting membrane, tried, true and tested! Most reliable phoenix contractors use a double layer providing a bullet proof underlayment system for your tile roof.

Synthetic Underlayment:

There are many synthetic underlayment products like, Titanium, Rhino Roof, Tyvek, and Tigerpaw, just to name a few. It is paper thin, very light, up to 4 times lighter than traditional 40# tile underlayment, so it’s fast to install, and safe to walk on for the installer. The material costs and labor cost are less expensive than the traditional double layer 40# underlayment systems.

If you are on the run click here fill out some quick contact info and someone will get back to you.

The Synthetic Sales Gimmick

Many Arizona Roofing Contractors will demonstrate on how tough and strong a synthetic underlayment is by trying to tear a piece in half… it can’t be done. Of course, you can make the same argument by using a standard TARP purchased at Home Depot® or Lowes®.

Cost:

Many roofers charge more for a synthetic underlayment system, but actually costs less than traditional SBS underlayment, plus they are only using one paper thin layer, as mentioned earlier it’s easier to install saving them labor costs.

Quality:

As you are now aware, synthetic underlayment is lightweight and much thinner, about 20 mils thick. Most roofing contractors only install a single layer. THINK! You have a single layer of 20 mills protecting your house. Plus, it is not self-healing like their counterpart the SBS underlayment system, meaning when it is punctured by a fastener it does not seal around it like the SBS 40# underlayment does. Our heat can be brutal on synthetic underlayment systems as well

Traditional 40# Underlayment System

Most reputable roofing contractors use a double layer, approximately 110 mills of thickness and an 18″ head lap verses the standard 2″ or lower. It is self-healing meaning it seals around each fastener. Two-layers takes longer to install verses a single layer of a paper-thin synthetic underlayment. Traditional underlayment like Fontana® VulcaSeal® G40 rolls cover about 200 square feet, is quite dense and one installer can only carry one roll at a time. While the synthetic underlayment comes in 1000 square foot rolls and installer can easily carry it on his shoulder without fear of a back injury, Like I said. “very light material”
Call: (480) 629-5244